Basic Setup; Alarm Setup - Furuno FM-8800D Operator's Manual

4.

BASIC SETUP

4.1

Alarm Setup

This section provides the procedures for setting up various alarms. The alarm
menu enables/disables internal and external alarms. Note that the
Distress/Urgency alarm cannot be disabled.
Old position alarm in manual position entry mode
This alerts the operator when manually entered position data is older by the
number of hours or minutes set.
1. Press the MENU key.
SETUP MENU on transceiver unit
2. ALARM is selected; press the ENT key to display the ALARM menu.
POSITION OLDER 4H
EXT ALARM
ALARM MENU on transceiver unit
3. Rotate the CH knob (or press up / down arrow key) to choose POSITION
OLDER (POS. OLDER for remote handset) from the ALARM MENU and
press the ENT key. The following setting window appears.
4. Rotate the CH knob (or press up / down arrow key) to choose an appropriate
value and press the ENT key.
Alarm is output when position is older by the number of hours set here.
5. Press the CANCEL key twice to return to the standby display.
**** SETUP MENU ****
ALARM
AUTO ACK
ERASE LOG
MEMORY CHANNEL
MESSAGE FILE ENTRY
**** ALARM MENU ****
* SETUP MENU *
ALARM
AUTO ACK
ERASE LOG
MEMORY CH
MESSAGE FILE
SETUP MENU on remote handset
ALARM MENU on remote handset
4H
3H
2H
1H
0.5H
* ALARM MENU *
POS. OLDER
4H
EXT ALARM
4-1