Furuno FM-8800D Operator's Manual page 80

4. BASIC SETUP
To set type of alarm to output
1. Rotate the CH knob (or press up / down arrow key) to choose EXT ALARM
from the ALARM MENU and press the ENT key. The following setting window
appears.
2. Rotate the CH knob (or press up / down arrow key) to choose an appropriate
option. Alarm is output to external device.
DSTRS/URG:
SAFETY:
ROUTINE:
3. Press the ENT key.
4. Choose ON or OFF as appropriate and press the ENT key.
5. Press the CANCEL key three times to return to the standby display.
Note that the setting of ROUTINE is turned to ON after turning on the power
4-2
DIST/URG : ON
SAFETY : OFF
ROUTINE : ON
Distress or urgency call output upon receipt.
Safety call output upon receipt.
Routine call output upon receipt.
Always ON