Receiving An All Ships Call - Furuno FM-8800D Operator's Manual

3. DSC OPERATION FOR NON-DISTRESS CASES
3.4.2

Receiving an all ships call

In case of ON HOOK
1. When an all ships call is received, the audio alarm sounds and the display
looks something like the one shown below.
2. Press the CANCEL or ENT key to silence the alarm. The display changes as
follows.
3. Press the ENT key. The display changes to the standby display, indicating
channel specified, and you can watch the contents of the message.
In case of OFF HOOK
1. When an all ships call is received, the audio alarm sounds and the ALARM
LED blinks.
2. Press the ACK key. The display changes to the standby display, indicating
channel specified.
Note: Before pressing the ACK key, if you press the CANCEL key, the alarm
stops. Press the CANCEL key again to cancel the all ship call, or press
the ENT key to accept the all ship call and the display changes to the
standby display, indicating channel specified.
3-18
All ships
call received.
FROM : 123456789
SAFETY
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 16
CANCEL ALARM
** Received Message **
APR01/í04 12 : 34 ECC : OK
ALL SHIPS CALL
FROM : 123456789
SAFETY
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 16
PRESS ENT TO CHANGE CH