Furuno FM-8800D Operator's Manual page 55

2. Press the ENT key to open the call type list.
COA T CALL
HIP CALL
GROUP CALL
P TN CALL
ALL HIP
AREA CALL
G
PO ITION
3. Rotate the CH knob (or press up / down arrow key) to choose GROUP CALL
and press the ENT key.
4. GROUP ID is selected; press the ENT key.
5. Key in a group ID and press the ENT key.
6. ROUTINE is selected; press the ENT key.
7. Choose ROUTINE, BUSINESS, SAFETY, or URGENCY as appropriate
followed by pressing the ENT key.
8. TCmd1 is selected; press the ENT key.
9. Choose SIMPLEX TP, DUPLEX TP, DATA or FAX followed by pressing the
ENT key. If you chose SIMPLEX, DUPLEX, or FAX, NO INFO appears in the
Tcmd2 field. Go to step 12. If you chose DATA, go to the next step.
10. TCmd2 is selected; press the ENT key.
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis
11. Choose the data type and press the ENT key.
12. Choose CH and press the ENT key. The following window appears.
3. DSC OPERATION FOR NON-DISTRESS CASES
POLLING
NEUTRAL
MEDICAL
RELAY ALL
RELAY EL
DI TRE
OUTINE
BUSINESS
SAFETY
U GENCY
DIST ESS
SIMPLEX TP
UPLEX TP
ATA
FAX
V. 26 ter
V. 27 ter
V. 32
SELECT CH
NO INFO
3-11