Setting Of Interface Unit - Furuno SEARCHLIGHT CH-250 Installation Manual

3.6

Setting of Interface Unit

Set DIP switch S1 in the interface unit as follows.
The monitor unit MU-100C or the interface unit is connected to DATA/VIDEO OUT port of
the interface unit : all OFF.
Nothing is connected to DATA/VIDEO OUT port of the interface unit : all ON.
ON
J1
J2
Interface unit, DIP switch S1 location
External
Monitor
Processor Interface
Unit
S1:All OFF
External
Monitor
Processor Interface
Unit
S1:All ON
External
Monitor
Processor Interface
Unit
S1:All OFF
J3
*: J6 and J7 set to "THROUGH" side.
Monitor
Unit Unit
Unit
External
Monitor
Interface
Unit Unit
S1:All ON
40