Flush mounting for control unit Type:
OP02-83-1.5, Code no.: 001-413-600 (1.5 m cable)
OP03-83-5, Code no.: 001-413-610 (5m cable)
Name
Fixing metal
Self-tapping screw
Hex. bolt
Cable assembly
1. Make holes at the place to mount (W287 x H87).
2. Fasten the fixing metal to the control unit with two hex. bolts (supplied as option).
3. Fasten the fixing metal assembled at step 2 to holes made at step 1 with four tapping
screws (supplied as option).
1.1.3
Blackbox type
The blackbox type is required to connect a standard VGA monitor via the interface unit IF-8000.
Supply monitor and interconnection cable (Max. length 15 m with Dsub-15P connectors of male,
three rows of 15 pins) locally. The monitor used should satisfy the specifications shown below.
•
VGA type
•
ANALOG RGB 0.7 Vpp, positive polarity
•
TLL level H, V, Negative polarity
Fixing Metal
Type
06-021-2101-2
100-279-732-10
5x20
000-162-609-10
M4x12
000-162-939-10
MJ-A10SPF0002-0
000-142-878
15
MJ-A10SPF0002-0
000-131-411
50
Fixing metal
Hex. Bolts
Code No.
Qty
1
4
2
1
1
Hex. Bolts
4
Remarks
1.5 m
Select one.
5 m