Flush Mounting; Mounting Separated Monitor Unit; Mounting Base - Furuno CH-300 Installation Manual

Flush mounting

Flush mounting for unibody (Type: OP06-16, Code no.: 006-556-300)
Name
Fixing metal
Self-tapping screw
Hex. bolt
1. Cut out a hole (W287 x H297) in the mounting location.
2. Fasten monitor/control unit with the fixing metal (supplied) and four hex. bolts
(M4x12, supplied).
3. Fasten the fixing metal assembled at step 2 to hole made at step 1 with six
self-tapping screws (5x20, supplied).
1.1.3

Mounting separated monitor unit

1. Fasten the mounting base to the mounting location with four self-tapping
screws (5x20).
2. Dismount the coupling plate to separate monitor unit from control unit.
3. Attach the bracket at rear of the monitor unit with four binding screws
(M4x10).
Type Code No.
06-021-1311-2 100-279-612-10
5x20 000-162-609-10
M4x12 000-162-939-10
Hex. bolts
Fixing metal
FRONT

Mounting base

1. MOUNTING
Qty Remarks
1
6
4
1-3