Furuno CH-300 Installation Manual page 12

1. MOUNTING
4. Coat threads of upset screws (M6x16, 2 pcs.) used to fasten bracket to
mounting base.
5. Fasten the bracket to the mounting base with two upset screws. (Use the
upper holes to tilt the monitor unit 20°; lower holes to tilt it 9°.)
Flush mounting for monitor unit (Type: OP06-17, Code no. 006-556-310)
Fixing metal
Self-tapping screw
Hex. bolt
1. Cut out a hole (W287 x H207) in the mounting location.
2. Fasten the fixing metal (supplied) to the monitor unit with four hex. bolts
(M4x12, supplied).
3. Fasten the fixing metal assembled at step 2 to hole made at step 1 with four
self-tapping screws (5x20, supplied).
1-4
1
2
4
3
Bracket, rear view
Name Type
06-021-1321-2
5x20
M4x12
Bracket (rear view)
1
2
4
3
Code No.
100-279-622-10
000-162-609-10
000-162-939-10
Hex. bolts
Fixing metal
Qty Remarks
1
4
4