Tank Guide Attachment - Furuno CH-300 Installation Manual

8. Coat the inside of the tank guide with ADHESIVE 1104 200G. Then, fasten
tank guide at the neck of the main shaft securely with M10X80 bolts.
Hex. bolt
(M10X80)
Bow mark
9. Pass the main shaft through the flange assembly.
10. Pass the main shaft through the shaft retainer at the raise/lower drive unit.
Main body flange
: Coat with ADHESIVE 1104 200G
Flat washer
Spring washer
*
Bow
Face the tank guide
toward ship's bow.

Tank guide attachment

U-nut
Spring washer
Hex. bolt M10X35
Nut
Pipe cap
Shaft retainer
Bow mark
Bow
1. MOUNTING
1-15