Bracket, Rear View; Fastening Bracket To Mounting Base - Furuno CH-300 Installation Manual

1. MOUNTING
3. Coat threads of upset screws (M6x16, 2 pcs.) used to fasten bracket to
mounting base.
4. Fasten the bracket to the mounting base with two upset screws. (Use the
upper holes to tilt the monitor unit 20 ; lower holes to tilt it 9 .)
1-2
1 2
3
4

Bracket, rear view

Bracket
Upset Screw

Fastening bracket to mounting base

Bracket (rear view)
1 2
3
4
For 9 tilt
Mounting base
For 20 tilt