Memory Recall; Memory Recall From The Microphone Keypad; Moving Memory Data To The Vfo; Memory Only Mode - Yaesu FTM-3100R Operating Manual

Memory Recall

Once the desired frequencies are stored into memory channels, switch from the "VFO"
mode to the "Memory Recall" mode, to operate on the just-stored memory channels.
1. Press the [ V/M ( MW )] key, repeatedly if nec-
essary, until the "
channel number appear on the display; this
indicates that the "Memory Recall" mode is
now engaged.
2. When more than one memory has been
stored, use the DIAL knob to select any of
the programmed memories for operation.
Note: Alternatively, the microphone [ UP ] or [ DWN ] button may be used to step or scan
through the available memories. When using the microphone buttons, press the
button momentarily to move one step up or down; press and hold the [ UP ] or
[ DWN ] button for one second to begin memory scanning.

Memory Recall from the Microphone Keypad

While operating in the Memory Recall mode, the keypad of the MH-48A6JA Microphone
may be used for direct recall of memory channels.
To do this, enter the desired Channel Number on the keypad and then press the [ # ] key.
For example:
To recall Memory Channel "5", press [ 5 ] à [ # ]
To recall Memory Channel "123", press [ 1 ] à [ 2 ] à [ 3 ] à [ # ]
You may also recall Programmable Memory Scan (PMS) channels ("L0/U0" through "L9/
U9") by entering the channel numbers listed in the below table:
L1 201
U1 202
L2 203
U2 204

Moving Memory Data to the VFO

Data stored on memory channels can easily be moved to the VFO.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Memory Only Mode

Once memory channel programming has been completed, you may place the radio in a
"Memory Only" mode, whereby VFO operation is impossible.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
FTM-3100R/E Operating Manual
" icon and a memory
L3 205 L5
U3 206 U5
L4 207 L6
U4 208 U6
Memory Operation
VOL
REV
SQL
D W
209 L7 213
210 U7 214
211 L8 215
212 U8 216
DIAL
M H z V / M
TXPO
SETUP M W
L9 217
U9 218
L0 219
U0 220
23