Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual page 93

Description of function key programs (con't from previous page)
Item
[ARP•AIS]
DISP ARP
DISP AIS
TARGET DATA & ACQ
PAST POSN INTERVAL
REF MARK
CPA LIMIT
CPA
TCPA
GZ1
GZ2
TARGET LIST SORT
TRIAL MANEUVER
ARP•AIS FUSION
AIS MESSAGE
TRIAL MODE CHANGE
[OPERATION]
ECHO COLOR
BACK COLOR
RING
ALARM1
ALARM2
WATCH ALARM RESET
ZOOM
MARK DELETE
OWN TRACK DELETE
TGT TRACK DELETE
CHART ALIGN
DISPLAY SELECT
MOB
USER DEFAULT
OWN TRK ALL ERASE
TGT TRK ALL ERASE
MARK ALL ERASE
Activates/deactivates ARP.
Activates/deactivates AIS.
ARP: Acquires ARP target; shows data for ARP target selected.
AIS: Activates sleeping AIS target; shows data for AIS target
selected.
Chooses past position plotting interval.
Inscribes reference mark (for target-based speed).
Turns CPA limit on/off.
Enters CPA range.
Enters TCPA time.
Sets Guard Zone 1.
Sets Guard Zone 2.
Sorts target list.
Executes trial maneuver.
Converts ARP target to AIS target.
Displays AIS message board.
Switches between dynamic and static modes.
Chooses echo color.
Chooses background color.
Turns range rings on/off.
Sets no. 1 guard alarm.
Sets no. 2 guard alarm.
Resets watch alarm.
Enables zoom.
Deletes mark (origin mark, waypoint mark, plotter mark).
Deletes own ship's tracks according to setting of OWN TRACK
menu (see page 5-15).
Deletes other ship's tracks according to setting of TARGET TRACK
menu (see page 5-15).
Aligns chart with radar picture.
Chooses display mode.
Inscribes MOB mark.
Restores user defaults for [F1]-[F3].
(When "F-KEY" is selected at USER DEFAULT in OPERATION
(2/2) menu.
1. Set equipment as desired.
2. Display F1, F2 or F3 menu as applicable.
3. Choose USER DEFAULTS and long-push (more than one
second) the left button.
4. To recall a setting, select F1, F2 or F3 menu as applicable
and choose USER DEFAULTS.
The radar is then set to stand-by and "USER DEFAULT"
appears at the bottom right corner.
Erases all own ship's tracks.
Erases all other ship's tracks.
Erases all marks.
1. RADAR OPERATION
Description
1-67