Desktop Mount; One Memory Card If Unit And One Processor Unit; One Memory Card If Unit And Multiple Processor Units - Furuno FAR-2157 Installation Manual

Desktop mount

Requires the optional desktop mount kit FP03-10201. Refer to the packing list at the back of this
manual for further information about this kit.
1. Fix the mounting bracket 19-023-3081 to the unit with four screws.
2. Mount the above assembly on a desktop with four self-tapping screws.
Connections

One memory card IF unit and one processor unit

Connect as shown below.
Processor unit
J614
NETWORK

One memory card IF unit and multiple processor units

Prepare optional armored LAN cable kit and Switching Hub HUB-100. Connect as shown below.
No.1
J614
Processor
unit
NETWORK
No.2
Processor
unit
No.3
Processor
unit
No.4
Processor
unit
Connecting one memory card interface unit and multiple processor units via switching hub
12 VDC
MJ-A3SPF0015-100 (10 m)
PSE-4PTX-BL (10 m)
Connections for one memory card interface unit
12 VDC
MJ-A3SPF0015-100 (10 m)
FR-FTPC-CY (10/20/30 m)
(straight)
FR-FTPC-CY
(10/20/30 m)
(straight)
FR-FTPC-CY (10/20/30 m) (straight)
FR-FTPC-CY (10/20/30 m) (straight)
Memory card IF unit
12 VDC
NETWORK
RJ-45
Memory card IF unit
12 VDC
NETWORK
FR-FTPC-CY (10/20/30 m)
(straight)
two mini-cards
two mini-cards
Switching hub
HUB-100
(option)
4-11