Setting The Heading Readout On The Radar Display; Hdg Menu - Furuno FAR-2157 Installation Manual

Setting the heading readout on the radar display

Confirm that the gyrocompass is giving a reliable readout. Then, set the heading readout on the
radar display with the gyrocompass readout as follows:
1. Right-click the HDG box at the top right corner on the screen.
2. Spin the thumbwheel to choose 1 HDG SOURCE and push the left button.
3. Spin the thumbwheel to choose AD-10 and push the left button.
4. Spin the thumbwheel to choose 2 GC-10 SETTING and push the left button.
5. Spin the thumbwheel to set gyrocompass reading and push the left button.
6. Push the right button close the menu.

[HDG MENU]

1 HDG SOURCE
AD-10/SERIAL
2 GC-10 SETTING
000.0
HDG menu
4-9