Panel cover
Hex bolt
(M6x25)
Attaching hand grips
Hand grips are optionally available for the desktop-mount monitor unit. Attach them as follows:
1. Remove the snap buttons attached at step 5 on the previous page.
2. Fix hand grips with wave washers, rosette washers and flat head screws.
Attaching hood
When it is too bright in the daytime, use the optional hood (Type: FP03-11500, Code No.: 001-
020-090) to shade the screen.
Name
Hood
Fixing plate
Screw
Hanger (L)
Panel cover
To remove this, insert fingernail in groove.
Fastening monitor unit to hanger
Wave washer
Rosette washer
Hand grip
How to attach hand grips
Contents of hood
Type
FP03-11501
03-163-2202-0
M4x10 D=13 US304
M12 bolts for fixing
(Dockyard supply)
Hanger stay
Hanger (R)
Snap button
Hole plug
Flat head screw (torque: 7.6 Nm)
Code No.
001-020-120
100-335-560-10
000-862-543
Flat Washer M10
Spring Washer M10
Hex bolt
M10x30
Qty.
1
4
4
1-9