Special Features; System Health Monitoring - Supermicro X10DRC-T4 Plus User Manual

X10DRC/i-LN4+/-T4+ Motherboard User's Manual
1-3

Special Features

Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will
respond when AC power is lost and then restored to the system. You can choose for
the system to remain powered off (in which case you must press the power switch
to turn it back on), or for it to automatically return to the power-on state. See the
Advanced BIOS Setup section for this setting. The default setting is Last State.
1-4

System Health Monitoring

This section describes the features of system health monitoring of the motherboard.
This motherboard has an onboard BaseBoard Management Controller (BMC) that
supports system health monitoring. An onboard voltage monitor will scan the follow-
ing onboard voltages continuously: +3.3V, 3.3V Standby, +5V, +5V Standby, +12V,
CPU core, memory, chipset, BMC, and battery voltages. Once a voltage becomes
unstable, a warning is given, or an error message is sent to the screen. The user
of the voltage monitor.
Fan Status Monitor with Firmware Control
System health monitoring support provided by the BMC controller can check the
RPM status of a cooling fan. The onboard CPU and chassis fans are controlled by
IPMI Thermal Management.
Environmental Temperature Control
System health sensors monitor temperatures and voltage settings of onboard
processors and the system in real time via the IPMI interface. Whenever the tem-
cooling fans will be turned on to prevent the CPU or the system from overheating.
Note: To avoid possible system overheating, please be sure to provide
System Resource Alert
This feature is available when used with SuperDoctor 5. SuperDoctor 5 is used
SuperDoctor 5 to provide you with warnings when the system temperature, CPU
1-12