Supermicro X10DRC-T4 Plus User Manual page 15

Motherboard Features
CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
•
Dual Intel ® E5-2600v3/v4 Series Processors (Socket
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Notes: 1. E5-2600v4 requires Revision 2.0
BIOS (or higher). 2. E5-2600v3 is fully back-
compatible with all BIOS revisions.
•
Integrated memory controller supports: up to 1536
GB of Load Reduced (LRDIMM) or up to 768 GB of
Registered (RDIMM) DDR4 (288-pin) ECC modules
2400/2133/1866/1600 MHz in 24 slots
Note: Memory speed support is depending
on the CPUs used in the motherboard. For
the latest CPU/memory updates, please refer
to our website at http://www.supermicro.com/
products/motherboard. Please also refer to
the DDR4 Memory Configuration Guide at
http://www.supermicro.com/support/resources/
DIMM sizes
•
DIMM Up to 64 GB (per DIMM) @ 1.2V
•
Intel® PCH C612
•
Three (3) PCI Express 3.0 x8 slots (CPU2 Slot1/
Slot2/Slot6)
•
Two (2) PCI-Express 3.0 x16 slots (CPU1 Slot3/
CPU2 Slot5)
•
One (1) PCI-Express 2.0 x4 in x8 slot (CPU2 Slot4)
•
Graphics Controller via ASpeed AST 2400 BMC
•
Dual Intel i350 1GBASE-T (10/100/1000 Mb/s) Ether-
net controllers for GLAN1-GLAN4 ports (X10DRC/i-
LN4+), or
•
Dual Intel X540 10GBASE-T (100/1000/10000
Mb/s) Ethernet controllers for TLAN1-TLAN4 ports
(X10DRC/i-T4+)
1-7
Chapter 1: Overview