Supermicro X10DRC-T4 Plus User Manual page 17

CPU
Monitoring
System
Management
Dimensions
Note 1: For SAS is supported by the onboard LSI3108 controller, and is
available on the X10DRC-LN4+/T4+ only)
Note 2: CPU Maximum Thermal Design Power (TDP) is subject to chassis
and heatsink cooling restrictions. For proper thermal management, please
Note 3
support/manuals/.
•
Power-on mode for AC power recovery
•
Intel ® Intelligent Power Node Manager 3.0 (Avail-
able when the Supermicro Power Manager (SPM)
is installed and special power supply used. See
Page 1-14.)
•
Management Engine (ME)
CPU Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V Standby,
+5V, +5V Standby, +12V, CPU core, memory, chipset,
BMC, and battery voltages
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Status Monitor for Speed Control
•
Status Monitor for On/Off Control
•
CPU Thermal Design Power (TDP): support up to
145W (See Note 2 below)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual Cooling Zone
•
Low noise fan speed control
•
Pulse Width Modulation (PWM) fan contorl
•
2.0 support
•
•
System resource alert via SuperDoctor 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis Intrusion Header and Detection
•
13.68" (L) x 13.05" (W) (347.47 mm x 331.47 mm)
1-9
Chapter 1: Overview