Supermicro X10DRC-T4 Plus User Manual page 13

Jumper Description
JBT1
JI 2 C1/JI 2 C2 SMB to PCI-E Slots
JPB1 BMC Enable
JPG1 VGA Enable
JPLAN1 GLAN1/2 Enable (X10DRC/i-LN4+)
10G(T)_LAN1/2 Enable (X10DRC/i-T4+)
JPLAN2 GLAN3/4 Enable (X10DRC/i-LN4+)
10G(T)_LAN3/4 Enable (X10DRC/i-T4+)
JPME2 Manufacture (ME) Mode Select
JPS1 SAS Enable
JWD1 Watch Dog Timer Enable
Connectors Description
Battery Onboard CMOS Battery (See Chpt. 3 for Used Battery Disposal)
(JBAT1)
COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header
FAN1-6, CPU/System Fan Headers
FANA-C
J24 24-pin ATX Main Power Connector (See Warning on Pg. 1-6.)
JD1 Speaker/Power LED
JF1 Front Panel Control Header
JIPMB1 4-pin External BMC I
JL1 Chassis Intrusion
2
JPI C1 Power Supply SMBbus I
JPWR1/2 8-Pin Power Connectors
JSD1/JSD2 SATA DOM (Device on Module) Power Connectors
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
JUIDB1
LAN1/LAN2 Gigabit LAN(GLAN) Ethernet Ports 1/2 (X10DRC/i-LN4+)
10G(T) LAN Ethernet Ports 1/2 (X10DRC/i-T4+)
LAN3/LAN4 Gigabit LAN (GLAN) Ethernet Ports 3/4 (X10DRC/i-LN4+)
10G(T) LAN Ethernet Ports 3/4 (X10DRC/i-T4+)
(IPMI) LAN IPMI_Dedicated LAN support by the ASpeed controller
(I-)SATA 0-5 SATA 3.0 Connectors supported by Intel PCH (I-SATA 0-5)
(S-)SATA 0-3 SATA 3.0 Connectors supported by Intel SCU (S-SATA 0-3)
SAS0-3, 4-7 SAS 3.0 Connections supported by the LSI 3108 controller
(3.0) (JS39) (for the X10DRC-LN4+/T4+ only)
X10DRC/i-LN4+/-T4+ Jumpers
X10DRC/i-LN4+/-T4+ Connectors
2
C Header (for an IPMI Card)
2
1-5
C Header
Chapter 1: Overview
Default Setting
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)