Supermicro X10DRC-T4 Plus User Manual page 14

X10DRC/i-LN4+/-T4+ Motherboard User's Manual
(CPU2) Slot1
(CPU2) Slot2
(CPU1) Slot3
(CPU2) Slot4
(CPU2) Slot5
(CPU2) Slot6
S-SGPIO1,
T-SGPIO1/2
SP1
JSTBY1
(BP) USB 0/1
(2.0)
(BP) USB 4/5
(3.0)
(FP) USB 7/8
(3.0)
(FP) USB 2/3
(2.0)
(FP) USB 6
(3.0)
VGA
LED
DS13 (Note below)
LE1
LE2
LEDM1
LEDS5 (Note below) SAS Activity LED
LEDS6 (Note below) SAS Error LED
Note: Available on the X10DRC-LN4+/T4+ only.
Warning: To avoid damaging the power supply or the motherboard, be sure to use
a power supply that contains a 24-pin and two 8-pin power connectors. Be sure to
connect the power supply to the 24-pin power connector (J24), and two 8-pin power
connectors (JPWR1, JPWR2) on the motherboard. Failure in doing so may void the
manufacturer warranty on your power supply and motherboard.
PCI-Express 3.0 x8 Slot from CPU2
PCI-Express 3.0 x8 Slot from CPU2
PCI-Express 3.0 x16 Slot from CPU1
PCI-Express 2.0 x4 in x8 Slot from CPU2
PCI-Express 3.0 x16 Slot from CPU2
PCI-Express 3.0 x8 Slot from CPU2
Serial_Link General Purpose I/O Headers 1/2/3 (for SATA ports),
(T-SGPIO1 for I-SATA0-3, T-SGPIO2 for I-SATA4/5, S-SGPIO1
for S-SATA0-3)
Internal Speaker/Buzzer
+5V Standby Power Header
Backpanel USB 2.0 Ports 0/1
Backpanel USB 3.0 Ports 4/5
Front Accessible USB 3.0 Connection Header 7/8
Front Accessible USB 2.0 Connection Header 2/3
Front Accessible USB 3.0 Connection Header 6
Backpanel VGA Port
X10DRC/i-LN4+/-T4+ LED Indicators
Description
SAS Heartbeat LED
Rear UID LED
Onboard Power LED
BMC Heartbeat LED
State
Green: Blinking
Blue: On
Green: On
Green: Blinking
Green: Blinking
Red: On
1-6
Status
SAS Normal
System PWR On
BMC Normal
SAS Active
SAS Error(s)