Appendix B Software Installation Instructions; B-1 Installing Software Programs - Supermicro X10DRC-T4 Plus User Manual

Table of Contents

Advertisement

Software Installation Instructions

B-1 Installing Software Programs

The Supermicro ftp site contains drivers and utilities for your system at
supermicro.com. Some of these must be installed, such as the chipset driver.
After accessing the ftp site, go into the CDR_Images directory and locate the ISO
Another option is to go to the Supermicro Website at
products/. Find the product page for your motherboard here, where you may down-
load individual drivers and utilities.
on your system and the display shown below should appear.
Note 1: Click the icons showing a hand writing on paper to view the
items to install each item (from top to the bottom) one at a time. After
installing each item, you must re-boot the system before moving on
to the next item on the list. The bottom icon with a CD on it allows you
to view the entire contents.
Note 2: When making a storage driver diskette by booting into a Driver
SATA as IDE in the BIOS Setup. After making the driver diskette, be sure
to change the SATA settings back to your original settings.
Appendix B: Software Installation Instructions
Appendix B
Driver/Tool Installation Display Screen
B-1
http://www.supermicro.com/
ftp://ftp.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X10drc-ln4 plusX10dri-t4 plusX10dri-ln4 plus

Table of Contents