Mounting The Memory Card Interface Unit - Furuno MARINE RADAR 1823C Installation Manual

4.3

Mounting the Memory Card Interface Unit

The memory card interface CU-200 enables to use more two chart cards.
Type: CU-200-NAV
Code: 000-081-567
Memory card interface CU-200
Cable assy
Cable assy
Threaded rod
Hex. nut
Flat washer
Spring washer
Flush mounting
This unit can be flush-mounted in a panel with the standard installation materials.
1. Prepare a cutout in the mounting location, referring to the outline drawing at the end of
this manual.
2. Screw in the threaded rods to the flange of the front panel of the unit securely by hands.
3. Set the unit to the cutout.
4. Insert the flat washer, spring washer and nut in that order for each rod and fasten the
nuts.
4-10
Name
MJ-A6SPF/TM11AP
8C050
MJ-A15A3F0003-030
M4X5
M4
M4
M4
Flush mounting
Type Code No.
000-081-569
000-146-289
000-145-513
000-147-539
000-863-106
000-864-126
000-864-256
Qty
1
1
1
4
4
4
4