Furuno MARINE RADAR 1823C Installation Manual page 47

Furuno marine gps system user manual
Hide thumbs Also See for MARINE RADAR 1823C:
Table of Contents

Advertisement

Item
IP ADDRESS
HOST NAME
RADAR SOURCE
CHART SOURCE
SOUNDER SOURCE
AUX SOURCE
SUBNET MASK
GATEWAY ADDRESS
OFFSET PORT
NUMBER
Model
MODEL1722/1732/1742/1762
MODEL1722C/1732C/1742C/1762C/1752C
MODEL1833/1933/1943
MODEL1823C/1833C/1933C/1943C/1953C
GD-1700/1700C
GD-1900C
CU-200
Contents of Network setup menu
Description
This address is assigned at the factory. Change the
address (last three digits; 001 to 254) when like
models are connected directly or through the hub. Do
this change before connecting the equipment to the
other equipment or hub to distinguish. Do not set the
same IP address in the network.
Set the name for your display unit to distinguish it from
others in the NavNet system. Confirm that two
equipment don't have same host names. The host
name has been preset depending on the series of
NavNet. See the table in below. This host name is
used for RADAR SOURCE and CHART SOURCE.
Enter the host name "RADAR (preset)" or the new
name set at HOST NAME item setting if the unit has
been changed of the network radar to use for the radar
display. Clear the RADAR SOURCE name when your
equipment is GD-1900C and no radar is connected.
Enter a host name (set at HOST NAME) of network
display unit to select equipment which has chart card
in its slot (Max. three units) to use. The driver names
of the memory card interface unit (option) are
MCDRIVE-1 (left side) and MCDRIVE-2 (right side).
The host name of the network sounder ETR-6/10N or
ETR-30N is preset (SOUNDER) to use for the video
sounder display. Clear the host name when no
network sounder is connected.
For the facsimile receiver FAX-30. Use the default
setting.
Not used. Reserved for future use.
NavNet equipment default settings
IP ADDRESS
172.031.003.004
172.031.003.001
172.031.003.002
172.031.003.003
172.031.014.001
172.031.003.003
172.031.014.100
Default Setting
Radar:
172.031.003.003
MODEL series:
RADAR
GD-1900C:
PLOTTER
RADAR
None
SOUNDER
WX FAX
255.255.000.000
000.000.000.000
10000
HOST NAME
RADAR
RADAR
RADAR
RADAR
PLOTTER
PLOTTER
MCDRIVE
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Marine radar 1833cMarine radar 1933cMarine radar 1943c1953cMarine radar gd-1900c1833c ... Show all

Table of Contents