Network Setup Menu - Furuno MARINE RADAR 1823C Installation Manual

3.2

NETWORK SETUP Menu

To communicate with other NavNet equipment, this setting should be done.
1. Open the INSTALL SETUP menu.
2. Press the NETWORK SETUP soft key.
3. Select menu option and press the EDIT soft key or [ENTER] knob. For example, select
HOST NAME.
4. Use the trackball to select location and press the alphanumeric keys to set character (or
value).
5. Press the [ENTER] knob or ENTER soft key to finish.
6. Repeat steps 3-5 for other items.
7. Press the [MENU] key to finish.
*: For the CHART SOURCE setting, the card drive 1 or 2 on the optional CU-200 can be
selected by the 1/2 soft key. "-1" or "-2" is also displayed for other device (for example,
RADAR-1 or PLOTTER-1), but these numbers may be ignored.
3-2
172.031.003.003
IP ADDRESS
RADAR________
HOST NAME
RADAR________
RADAR SOURCE
______________
CHART SOURCE*
______________
______________
SOUNDER_____
SOUNDER SOURCE
WXFAX___
AUX SOURCE
255.255.000.000
SUBNET MASK
000.000.000.000
GATEWAY ADDRESS
OFFSET PORT NUMBER
NETWORK SETUP menu
HOST NAME
R
Host name window
NETWORK
EDIT
-1
-1
-1
RETURN
10000
A D A R _ _ _ _ _ _ _ _
SETUP
EDIT