How To Enter Waypoints Automatically - Furuno GP-33 User Manual

12. To change the comment, select [Comment] and press the ENT key.
13. Enter the comment, and press the ENT key.
14. Press the MENU/ZOOM key to register the new waypoint into the list.
15. To register other waypoints, repeat steps 4 through 14.
16. Press the MENU/ZOOM key several times to close the menu.
3.1.4

How to enter waypoints automatically

Waypoints can be entered automatically when your course changes by a specified de-
gree. This function is useful for reversely following the waypoints recorded on an out-
ward voyage when you return home. To set the criteria for automatic entering of
waypoints, do the following:
1. Press the MENU/ZOOM key twice to show the main menu.
2. Select [Plotter Setup], and press the ENT key.
3. Select [Auto Waypoint Entry (COG)], and press the ENT key.
4. Select [On], and press the ENT key.
5. Press
6. Enter the degree, and press the ENT key (setting range: 15 to 150°).
7. Press
8. Enter the seconds, and press the ENT key (setting range: 1 to 60 seconds).
9. Press the MENU/ZOOM key twice to close the menu.
to select the degree setting, and press the ENT key.
to select the seconds setting, and press the ENT key.
3. WAYPOINTS
3-3