Filling The Water Tank - Samsung FQV213 Installation And Operating Instruction

FILLING THE WATER TANK

When you open the cooking compartment door, you will see the water tank on the right-hand
side. Only fill the tank with fresh tap water or with still bottled water. If your water is very hard, we
recommend that you use softened water (see also "Water hardness).
Caution
Fill the water tank before
each use
Empty the water tank after
each use
"Fill water tank" display
Removing drip tray
FQV213_XEO_03870C-EN.indb 15
Do not fill the water tank with distilled water or any other liquids.
Lift the water tank over the interlock and pull the tank out of the
appliance. Fill the water tank with cold water up to the "max."
mark. Close the lid until you feel it engage.
Slide the water tank back until it engages.
Pull the water tank out of the appliance slowly. Pulling it out
quickly may cause water to spill. Hold the water tank horizontally,
so that no remaining water can drip out of the valve seat.
Empty out the water.
Thoroughly dry the water tank in the appliance and the seal in the
lid.
If the water tank is empty, a signal sounds.
A symbol
1. Open the cooking compartment door carefully. Steam will
escape.
2. Take out the water tank, fill to the "max" mark and reinsert.
3. Press the START button.
Empty drip tray at regular intervals. Push drip tray in until you hear
a click, and remove tray from locked position.
Drip tray
Push in and remove
appears in the display. The operation is interrupted.
before you begin _15
2011-04-04 1:30:52