Samsung FQV213 Installation And Operating Instruction page 214

Severe warning signs for cleaning
WARNING
Do not clean the appliance by spraying water directly
onto it.
Do not use benzene, thinner or alcohol to clean the
appliance.
- This may result in discoloration, deformation,
damage, electric shock or fire.
Before cleaning or performing maintenance, unplug
the appliance from the wall socket and remove food
waste from the door and cooking compartment.
- Failure to do so may result in electric shock or fire.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
Do not use your microwave oven to dry papers or
clothes.
For your safety, do not use high-pressure water
cleaners or steam jet cleaners.
Caution signs for cleaning
CAUTION
The oven should be cleaned regularly and any food
deposits removed.
Failure to maintain the oven in a clean condition
could lead to deterioration of the surface that could
adversely affect the life of the appliance and possibly
result in a hazardous situation.
Take care not to hurt yourself when cleaning the
appliance (external/internal).
- You may hurt yourself on the sharp edges of the
appliance.
Do not clean the appliance with a steam cleaner.
- This may result in corrosion.
6_ safety information
FQV213_XEO_03870C-EN.indb 6
PRECAUTIONS TO AVOID
POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE
ENERGY
Failure to observe the following safety precautions may
result in harmful exposure to microwave energy.
(a) Under no circumstances should any attempt be made
to operate the oven with the door open or to tamper
with the safety interlocks (door latches) or to insert
anything into the safety interlock holes.
(b) Do not place any object between the oven door
and front face or allow food or cleaner residues to
accumulate on sealing surfaces. Ensure that the door
and door sealing surfaces are kept clean by wiping
after use first with a damp cloth and then with a soft
dry cloth.
(c) Do not operate the oven if it is damaged until it has
been repaired by a qualified microwave service
technician trained by the manufacturer. It is particularly
important that the oven door closes properly and that
there is no damage to the:
(1) Door (bent)
(2) Door hinges (broken or loose)
(3) door seals and sealing surfaces
(d) The oven should not be adjusted or repaired by
anyone other than a properly qualified microwave
service technician trained by the manufacturer.
This product is a Group 2 Class B ISM equipment. The
definition of group 2 which contains all ISM equipment
in which radio-frequency energy is intentionally
generated and/or used in the form of electromagnetic
radiation for the treatment of material, and EDM and
arc welding equipment. For Class B equipment is
equipment suitable for use in domestic establishments
and in establishments directly connected to a low
voltage power supply network which supplies buildings
used for domestic purposes.
2011-04-04 1:30:48