Adjusting The Lcd Monitor Brightness And The Speaker Volume - FujiFilm 4700 Owner's Manual

STARTUP SCREEN
3
S E T ?
A registration confirmation screen appears. To
register the current selection, press the
"MENU/EXE" button.
!
When a new image is registered, the previously
98
registered image is erased.
If you set "STARTUP SCREEN" in the SET-UP
menu to ON, the registered image is displayed
when you switch the camera on.
!
The quality of the displayed startup screen differs
from that of the original image.

ADJUSTING THE LCD MONITOR BRIGHTNESS AND THE SPEAKER VOLUME

1
If you hold down the "SHIFT/ r " button
press the "DISP" button, the "adjustment bar" is
displayed.
Adjusting the BRIGHTNESS
You can only adjust the brightness when the Mode
" " or " "
switch is set to either 0 1 . However, when
" "
the Mode switch is set to 0 , the brightness cannot
" "
be adjusted if the Mode dial is set to 2 .
Adjusting the VOLUME
The speaker volume can only be adjusted when the
Mode switch is set to " 1 " and a movie file is
selected.
2
Press " d " and " c " on the 4-direction button to
adjust the LCD monitor brightness or the
speaker volume. Use " a " and " b
direction button to switch between brightness
and volume. Press the "MENU/EXE" button to
and
confirm the setting.
!
If movie playback is in progress, playback is paused.
!
The settings cannot be changed if the LCD monitor
is switched off.
!
To exit this procedure without changing the settings,
press the "CANCEL/BACK" button.
" on the 4-
5
99