Setting The Date And Time - FujiFilm 4700 Owner's Manual

SETTING THE DATE AND TIME

1
Set the Mode switch to " 0 "
Photography Mode dial to" 2 ".The SET–UP
screen appears on the LCD monitor.
!
See P.92 for more information on the items in the
" 2"(SET–UP) mode menu.
!
If the AC power adapter has been connected or the
batteries have been installed for about half a day or
longer, the date and time settings will be retained for
about half a day after the AC power adapter has
been disconnected or the batteries have been
22
removed.
2
Set the Press " b " on the 4-direction button to select
"DATE/TIME". Press the "MENU/EXE" button.
3
Press " d " or " c " on the 4-direction button to
select the setting (year, month, day, hour or
minute), and use " a " and " b " to correct the
setting.
!
Seconds cannot be specified.
!
When the displayed time passes "12:00:00", the
camera automatically switches between AM and PM.
!
PAL model : .01.01.
2000
4
When you have finished setting the date and
time, press the "MENU/EXE" button to confirm
the setting. The SET–UP screen then reappears.
To exit the " 2 " (SET-UP) mode, set the
Photography mode dial to any mode other than
the " 2" mode.
!
To set the time precisely, press the "MENU/EXE"
button when the time is at zero seconds.
1
23