Mflash Brightness Adjustment; Setting The White Balance; Setting The Sensitivity - FujiFilm 4700 Owner's Manual

PHOTOGRAPHY MENU
M
FLASH BRIGHTNESS ADJUSTMENT
You can set the flash brightness when the
4
photography mode is set to " ".
Set the Flash Power setting to achieve the
optimum flash brightness when the subject in
the picture is very small or when you are using
close-up flash photography.
There are ±2 correction levels (–0.6 to +0.6 in
approx. 0.3 EV increments). See P.105 for a
definition of EV.
52
PHOTOGRAPHY MENU

SETTING THE WHITE BALANCE

You can set the white balance when the
4
photography mode is set to " ".
Change the white balance setting when you
want to take a picture with the white balance
fixed for the surroundings and lighting when the
picture is taken.
In Auto mode, the correct white balance may not
be obtained for subjects such as close-ups of
people's faces and shots taken under a special
light source. In such situations, select the correct
white balance for the light source. See P.105 for
more information on the white balance.
!
To take the picture immediately, press the
"MENU/EXE" button to confirm the white balance
setting.
AUTO : Automatic adjustment
(Shooting to show the ambience of the
light source)
g
: Shooting outdoors in fine weather
f
: Shooting in shade
l
: Shooting under "Daylight" fluorescent
lamps
m
: Shooting under "Warm White" fluorescent
lamps
n
: Shooting under "Cool White" fluorescent
lamps
q
: Shooting in incandescent light
The white balance setting is ignored when the flash is
used. To achieve the desired effect in your shot,
press the flash back down to suppress flash
operation. ( P.62)
PHOTOGRAPHY MENU

SETTING THE SENSITIVITY

You can set the sensitivity (film speed) when the
4
photography mode is set to " ".
Use this setting when you want to take bright
pictures indoors without using a flash or when
you want to use a fast shutter speed (to prevent
camera shake, etc.).
Settings: 200 (standard setting), 400, 800
3
53