Adjusting The Monitor Brightness/Adjusting The Volume - FujiFilm FinePix M603 Owner's Manual

PLAYBACK FUNCTIONS REPEAT ( MOVIE )
MODE
Selecting the ending scene (playback location) for a repeat.
4
４０ｓ ４０ｓ
ＲＥＰＥＡＴ ＲＥＰＥＡＴ
Ending point
ＴＩＭＥ ＴＩＭＥ
２０ｓ ２０ｓ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
ＳＥＴ ＥＮＤ ＳＥＴ ＥＮＤ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
5
３０ｓ ３０ｓ
Playback range
I Playing Back Movies
Control
Playback/Pause
Fast forward/
Rewind
Rewind Fast forward
Skip playback
When paused
66
Run the movie until you reach the scene where
you want to end the repeat and then press the
"MENU/OK" button to set that scene as the
ending point. Repeated playback of the selected
section of movie begins automatically.
G
!
You cannot go back to a scene that precedes the starting
point for editing (playback location).
Playback, fast forward, rewind, pause and frame
advance can all be used.
To end repeated playback, press the "BACK"
button while the repeated movie is playing.
G
!
The camera is not automatically switched off during
repeated playback. Check the battery level. Use of the
AC power adapter is recommended to prevent battery
depletion.
Description
Playback begins. Playback automatically stops when the
end of the movie is reached. During playback, this button
pauses the movie.
Hold down "d" or "c" for approximately 1 second during
playback to rewind or fast-forward through the movie. See
P.57 for details.
While the movie is paused, pressing "d" or "c" advances
or rewinds the movie in one second increments each time
the button is pressed.
ADJUSTING THE MONITOR
5
BRIGHTNESS/ADJUSTING THE VOLUME
Settings
1
1 0
0 2
2
0 1 0 2
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
ＶＯＬＵＭＥ ＶＯＬＵＭＥ
3
ＶＯＬＵＭＥ ＶＯＬＵＭＥ
− ＋
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 0 0 2
N N
SET-UP Menu Options
The options available in the menu vary depending on whether "
selected.
h " h "
" Still photography mode " Playback mode
ＯＰＴＩＯＮ ＯＰＴＩＯＮ ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
ＡＵＴＯ ＡＵＴＯ
ＭＡＮＵＡＬ ＭＡＮＵＡＬ
1 Set the mode switch to "
", " " or "
2 Press the "MENU/OK" button to display the
menu on the screen.
1 Press "d" or "c" to select OPTION and
then press "a " or "b " to select "LCD
BRIGHTNESS" or "VOLUME".
2 Press the "MENU/OK" button.
1 Press "d " or "c " to adjust the monitor
brightness or the volume.
2 Press the "MENU/OK" button to confirm the
new setting.
", " " or " " mode is
h "
" Movie mode
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
ＶＯＬＵＭＥ ＶＯＬＵＭＥ
".
5
67