Set-Up; Adjusting Evf / Lcd (The Monitor Brightness); Fusing The Set-Up Screen - FujiFilm FinePix S3100 Owner's Manual

fi ADJUSTING EVF / LCD
4
( THE MONITOR BRIGHTNESS )
Settings
1
1 0 0 2
2
1 0 0 2
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＥＶＦ／ＬＣＤ ＥＶＦ／ＬＣＤ
3
ＢＲＩＧＨＴＮＥＳＳ ＢＲＩＧＨＴＮＥＳＳ
− ＋
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 1 0 2
58
q w
1 Set the Power switch to " " or " ".
2 Press the "MENU/OK" button to display the
menu on the screen.
●
!
The monitor brightness specified here remains valid until the
setting is changed again. This setting applies to both
photography and playback, and can be used to change the
monitor brightness in both modes.
1 Press "d" or "c" to select " F " OPTION and
fi
then press "a" or "b" to select " EVF/LCD".
2 Press the "MENU/OK" button.
1 Press "d " or "c " to adjust the screen
brightness.
2 Press the "MENU/OK" button to confirm the new
setting.
●
!
To end this procedure without changing the settings, press
the "DISP/BACK" button.

SET-UP

F USING THE SET-UP SCREEN
1
1 0 3 0 0 2
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＥＶＦ／ＬＣＤ ＥＶＦ／ＬＣＤ
2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
１
２ ３
ＩＭＡＧＥ ＤＩＳＰ． ＩＭＡＧＥ ＤＩＳＰ． ：ＯＮ ：ＯＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ：２ ＭＩＮ ：２ ＭＩＮ
ＦＯＲＭＡＴ ＦＯＲＭＡＴ
：ＯＫ ＯＫ
ＢＥＥＰ ＢＥＥＰ ：ＬＯＷ ：ＬＯＷ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
3
0 1 0 2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
１
２ ３
ＩＭＡＧＥ ＤＩＳＰ． ＩＭＡＧＥ ＤＩＳＰ． ＯＮ ＯＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ：２ ：２ ＭＩＮ ＭＩＮ
ＦＯＲＭＡＴ ＦＯＲＭＡＴ ：ＯＫ ＯＫ
ＢＥＥＰ ＢＥＥＰ ：ＬＯＷ ：ＬＯＷ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
4
1 Press the "MENU/OK" button to display the
menu on the screen.
2 Press "d" or "c" to select " F
" OPTION and
then press "a" or "b" to select "SET-UP".
3 Press the "MENU/OK" button to display the
SET-UP screen.
●
!
Always turn the camera off when replacing the batteries.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
Press "d" or "c" to move to options 1 to 3.
1 Press "a" or "b" to select a menu option.
2 Press "d" or "c" to change the setting. Press
"c " for "FORMAT", "DATE/TIME", "TIME
q
DIFFERENCE", "DISCHARGE" or " RESET".
After you have changed the settings, press the
"MENU/OK" button to confirm the changes.
4
59