Recorder Functions (Memory Play) - Fostex LIVE RECORDING MIXER LR16 Owner's Manual

Memory play
The LR16 provides the memory play function. This function allows you to perform instant start
playback of a stereo mix file which is assigned to any of the numeric keys (0 through 9). The
assigned file can be a file recorded by the LR16 or a file copied from a computer, etc.
Before performing the memory play function, use the Memory play setup screen to assign a
stereo mix file to a numeric key, assign the destination channels of playback audio and set the
play mode.
Only the following stereo mix files can be used for memory play.
• stereo mix files in the "2mix" folder of each project
• stereo mix files copied to the "MPLAY441" or "MPLAY480" folder from a computer,
etc.
2mix
PROJ001
2mix
PROJ002
The setting in the memory play setup screen is stored to the "MPLAY441" or
<Note>:
"MPLAY480" folder. The former stores the setting for FS 44.1 kHz files, while the
latter stores the setting for FS 48 kHz files. Depending on the current "Default FS"
setting, the corresponding setting is used. For example, if the "Default FS" is set to
44.1 kHz, memory play is performed according to the setting stored in the "MPLAY441"
folder.
Only stereo mix files whose FS matches the setting of the "Default FS" menu
<Note>:
item in the "System" menu of the MENU mode can be assigned to the numeric keys.
You cannot assign a file whose FS does not match the "Default FS" setting.
PROJ001-001.wav PROJ001-002.wav
PROJ002-001.wav PROJ002-002.wav
57
Model LR16 [Recorder functions / Memory play]
TAKE_2.wav
TAKE_1.wav
MPLAY441
LIVE_1.wav LIVE_2.wav
MPLAY480
TAKE_3.wav
LIVE_3.wav