About The Effect Types; Monitoring - Fostex LIVE RECORDING MIXER LR16 Owner's Manual

(4) Adjust the effected (wet) signal level sent
to the stereo L/R buss using the control in
the [EFFECT TO STEREO] section
Adjust the effected signal level while
monitoring the stereo buss signal using
headphones or monitor speakers.
<Memo>: To send the effected signal to the
group or AUX busses, use the controls in the
[EFFECT TO GROUP] or [EFFECT TO GROUP]
section.

• About the effect types

Standard hall reverb; detailled and trans-
HALL 1
parent, with a moderate amount of early
reflections.
Stadium reverb characterized by long
HALL
early reflections.
Reverb simulating an auditorium with
STADIUM
suppressed reverberation.
Room reverb simulating a moderate
ROOM
space with some sparkle.
Modem-sounding plate reverb with wide
PLATE 1
bandwidth.
PLATE 2
Plate reverb with a gentle character.
All-purpose hall reverb with no early re-
VOCAL1
flections, and uniform decay at all fre-
quencies.
Plate-like reverb is added to a spacious
VOCAL 2
short delay. This blends well with any
genre of music.
All-purpose reverb (karaoke style) that
VOCAL 3
makes any vocal sound professional.
Mono DLY Mono delay.
Pan DLY
Panning delay.
Short DLY
Short delay.
You can monitor the signal using headphones
via the [PHONES] jack or using monitor speak-
ers via the [MONITOR L/R] jacks.
The signal to be monitored can be selected
using the [MONITOR SELECT] switch. Each
press of the switch changes the monitor sig-
nals and the indicator for the current moni-
tor signal (ST, 1-2, 3-4 or EFF RTN) is lit.
Level meters
Indicators
You can monitor the stereo L and R buss signal,
which is output from the [STEREO OUT (L, R)]
ST
jacks.
You can monitor the group 1 and 2 buss signals,
1-2
which are output from the [GROUP (1, 2)] jacks.
You can monitor the group 3 and 4 buss signals,
3-4
which are output from the [GROUP (3, 4)] jacks.
EFF
You can monitor the output signal (wet signal) of
RTN the internal effects processor.
The output level of the [PHONES] jack is con-
trolled by the [MONITOR] and [PHONES] con-
trols, while the output level of the [MONITOR
L/R] jacks is controlled by the [MONITOR]
control. The output levels of the monitoring
signals are shown on the level meters above
the [MONITOR SELECT] switch.
If any of the [SOLO] switches is set to
<Note>:
ON, the solo signal is monitored, while the sig-
nal selected by the [MONITOR SELECT] switch
is interrupted.
39
Model LR16 [Mixer functions]

Monitoring

[MONITOR SELECT]
switch