Cleaning Your Spa; Using The Freedom Sound System - Cal Spas LES Owner's Manual

Special edition

Table of Contents

5.8 Cleaning Your Spa

Spa Cover and Pillows

Due to constant punishment your spa cover and pillows receive, you should protect them by applying a vinyl

and leather cleaner as part of your monthly maintenance plan. Use a product that is specifically designed to

protect spa covers and pillows from chemical and ultraviolet light damage without leaving an oily residue

behind that is normally associated with common automotive vinyl protectants.

Warning: DO NOT use automotive vinyl protectants on spa covers or pillows. These products are generally

oil-based and will cause severe water clarity issues that are difficult to correct.

Spa Shell

Each time you drain your spa, before you refill it you should clean your spa shell with an all purpose-cleaner and

apply a coat of surface protectant.

Use a low detergent, non-abrasive cleaner specifically formulated to clean the spa without damaging its acrylic

finish.

Use a non-oil based surface protectant that is specifically formulated to protect the spa's finish from the

chemicals and minerals associated with normal spa use.

The Freedom Sound System™ entertainment option contains a Bluetooth-enabled speaker system that is

available for certain Cal Spa models. Any Bluetooth-enabled device can be used to play audio through your spa.

Before you can use the sound system, you need to pair the Bluetooth module with your device. The Bluetooth

module is installed within the spa cabinet. Everything can be performed with your Bluetooth device. The

example shown below is from an iPhone device. Your device may appear differently. Before you begin, make

sure Bluetooth is enabled on your device.

1. Select Bluetooth from your device's option list.

2. Select SWA8-6BT ... from the list of available devices to pair.

3. Your iPhone device will ask for a code: the code is 0000.

4. Allow your device to pair with the spa's Bluetooth module.

5. When the devices have been connected, the device SWA8-6BT... will be highlighted.

Only one Bluetooth device can be paired with the Freedom Sound System™ at any time.

(For Android users, the systems will pair automatically - no code is needed.

Once your device is paired and connected, all sounds from your device will be played through the sound system,

including system sounds and telephone.

3. 3.

4. 4.

Table of Contents