Cleaning And Replacing The Filter; Vacation Care; Cleaning Your Spa - Cal Spas Home Resort Z-524L Owner's Manual

46

Cleaning and Replacing the Filter

Filtration is one of the most important steps you can take to ensure clean, clear water. It is far less expensive to
fix water clarity problems by filtering your spa than by using excessive amounts of chemicals, excessive filtration
times, or by water replacement.
See the section "Filter Cleaning" on page 37 for more information.

Vacation Care

You can leave your spa unattended for up to two weeks if you follow these instructions.
ALWAYS lock your cover using the cover locks if you plan to be away from home and the spa is
filled with water.
1. Select the Low Range temp choice used for vacation mode. (See instructions on
vacation setting.)
2. Following the water quality instructions starting on
3. Shock the water (add either chlorine or bromine sanitizer).
4. When you return, check and adjust the pH and shock the water.
If you will not be using your spa for longer than 14 days and a spa maintenance service is not available, we
strongly recommend you drain or winterize your spa.

Cleaning Your Spa

Spa Cover and Pillows
Due to the constant punishment your spa cover and pillows receive, you should protect them by applying
a vinyl and leather cleaner as part of your monthly maintenance plan. Use a product that is specifically
designed to protect spa covers and pillows from chemical and ultraviolet light damage without leaving an
oily residue behind that is normally associated with common automotive vinyl protectants.
Warning: Do not use automotive vinyl protectants on spa covers or pillows. These products are generally
oil-based and will cause severe water clarity issues that are difficult to correct.
Spa Shell
Each time you drain your spa, before you refill it you should clean your spa shell with an all-purpose cleaner
and apply a coat of surface protectant.
Use a low detergent, non-abrasive cleaner specifically formulated to clean the spa without damaging its
acrylic finish.
Use a non-oil based surface protectant that is specifically formulated to protect the spa's finish from the
chemicals and minerals associated with normal spa use.
www.calspas.com
page 35, adjust the pH.
page 17 or page 26 for
2015 Portable Spa
LTR20151001, Rev. A