Table of Contents
Advertisement
3
Battery
Connector
• Plug the battery connector into the motor harness
connector.
Note: If the battery connector will not plug into the motor
harness connector, turn it over and try again! Do not force
the battery connector into the motor harness connector.
4
Seat Equipped With
Lock Fastener
• Determine whether the seat on your vehicle is equipped
with a lock fastener or requires use of the #10 x
found in the Small Parts bag, to lock the seat. If your
vehicle seat is equipped with a lock fastener, please
properly dispose of the #10 x
Battery Installation
Motor
Harness
Connector
Seat Requiring Use
1
Of #10 x
/
" Bolt
2
/
" bolt,
1
2
1
/
" bolt.
2
5
Tab
Tab
• Insert the tabs on the front of the seat into the slots in
the vehicle body.
Important Note: If the vehicle seat is equipped with a lock
fastener, make sure that the tab on the lock fastener is
aligned with the slot in the vehicle body.
• Press down on the back of the seat to snap the tabs on
the back of the seat into the slots in the vehicle body.
17
Tab
Seat
Tab
Lock
Fastener
Tab
Lock Fastener Opening
Advertisement
Table of Contents
