Power Wheels ROCK AND ROLL 76950 Owner's Manual page 10

5
Wheel Bushing
• Fit a wheel bushing into the rectangular opening in each
front wheel.
6
Front Axle
• Fit a washer onto one of the front axles.
• Slide a front wheel, bushing side first, onto the front axle.
Wheel
Bushing
Washer
Front
Wheel
Vehicle Body
Assembly
7
• Slide a round bushing onto the front axle and press it
into the center of the front wheel.
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer to secure it on the front
axle.
• Repeat assembly steps 6 and 7 to assemble the other
front wheel to the other front axle.
• Position the vehicle body upright.
8
Pegs
Handlebar
• Fit the rectangular tab on the back of the headlight into
the slot at the back of the handlebar console. Make sure
the pegs in the top corners of the headlight fit into
10 the handlebar console.
Cap
Nut
Round
Bushing
Headlight
Rectangular
Tab
Slot
Handlebar
Console