Summary of Contents for Power Wheels Kawasaki KFX NINJA B9272
Page 1
12 Volt Battery with Built-in Thermal Fuse and a Power Wheels 12 Volt Charger (both included). ® KAWASAKI AND NINJA ARE TRADEMARKS LICENSED BY KAWASAKI MOTORS CORP., www.powerwheels.com U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRIES SHOULD BE DIRECTED TO FISHER-PRICE, INC./POWER WHEELS, 636 GIRARD AVENUE EAST AURORA, NY 14052.
ELECTRICAL HAZARD • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.
WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
Page 8
Hubcap (Indented Side Out) Rear Wheel Rear Wheel Driver (Ring Side Out) Rear Axle • Slide the other rear wheel driver, ring side out, onto the rear axle. Make sure the rear wheel driver fits onto the pins in the motor assembly inside the vehicle. •...
Page 9
Steering Linkage • Slide the other steering linkage over the hooked end of the steering column and the other steering linkage. • Fit the hooked end of the steering column into the hole in the steering linkage. Washer • Slide a washer onto the end of the steering column. Assembly Hooked End of the...
Page 10
Front Axle Bushing (Ring End First) Washer • Slide a washer onto a front axle. • Slide a bushing, ring end first, onto the front axle. • Slide a front wheel, flat side first, onto the front axle. • Slide a hubcap, indented side out, onto the front axle. •...
Label Decoration Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. •...
IMPORTANT! Use only a Power Wheels with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels 12 volt charger before operating your vehicle for the first time.
Care If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. If acid is internally ingested, give water, milk of magnesia or egg whites immediately.
RIDING HAZARD WARNING Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas These areas must be: - away from swimming pools and other bodies of water to prevent drownings - generally level to prevent tipovers - away from steps, driveways, cars, roads and alleys.
How to Operate Your Vehicle IMPORTANT! As assembled, your vehicle is ready to roll in low speed (2 your child is ready to drive the vehicle in high speed (5 mph, maximum), follow the instructions on this and the next page to connect the high speed hook-up and use the power boost button. Drive Drive •...
How to Operate Your Vehicle High Speed IMPORTANT! To avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. • Turn the right grip to shift the vehicle into high speed. The vehicle drives forward at a maximum of 5 mph. •...
Problems and Solutions Guide IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your local Power Wheels on-line at www.powerwheels.com or call 1-800-348-0751.
Problems and Solutions Guide Problem Vehicle was running but Loose wire or loose connectors suddenly stopped Tripped thermal fuse Short run time (less than Undercharged battery 1 - 3 hours per charge) Overcharged battery Battery is old and will not accept full charge Tripped thermal fuse Vehicle runs sluggishly...
Page 19
Problems and Solutions Guide Problem Problem Vehicle runs sluggishly (cont.) Battery needs charging Battery is old and will not accept accept full charge Vehicle is overloaded Driving conditions are too stressful Vehicle runs in low speed but High speed hook-up does not run in high speed not connected Note: The vehicle is designed...
Page 20
IMPORTANT! DO NOT use this vehicle for the first time until you have charged the battery for 18 hours. Remember to… ✔ Charge the battery immediately after each use. ✔ Charge the battery once a month during storage, even if the vehicle has not been used.