Table of Contents
Advertisement
How to Spray
Spray Tip Installation
To avoid serious injury from skin injection,
do not put your hand in front of the Spray
Tip when installing or removing the Spray
Tip or Spray Tip Guard.
To prevent spray tip leaks make certain
spray tip and tip guard are installed properly.
1.
Perform Pressure Relief Procedure,
page 12.
2.
Engage trigger lock.
3.
Loosen gun retaining knob and remove
spray gun from holder.
4.
Verify spray tip and tip guard parts are
assembled in the order shown.
3A9002A
How to Spray
a.
Use spray tip to align gasket and
seal in the tip guard.
b.
Spray tip must be pushed all the
way into the tip guard. Turn spray
tip to push down.
c.
Turn the arrow shaped handle on
the spray tip forward to the spray
position.
5.
Screw spray tip assembly onto the gun
and tighten.
ti27480a
17
Advertisement
Table of Contents
