Mounting The Extender D - Extron electronics VGAUXGA Line Drivers With Audio Extender Series User Manual

Installation, cont'd

Mounting the Extender D

1.
2.
3.
Mounting the Extender D to the wall box
4.
5.
Extender Series • Installation
2-18
Remove power from the line driver by disconnecting the
power supply.
Place the Extender D through the opening in the wall or
furniture and into the wall box. Take care not to damage
the output cables, which fit behind the line driver at the
back of the wall box.
Mount the Extender D to the wall box with machine screws
as shown in the following illustration.
Wall Box
Wall opening
is flush with
edge of box.
Attach the Decora wall plate to the Extender D as shown in
the illustration above.
Reconnect the power supply and restore power to the
equipment.
I N
D I O
A U
I N
E R
U T
M P
C O
Extron
Extender D
VGA-QXGA
Line Driver
with Audio
Decora
Faceplate