2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
2.
Analog Input
Signal Cable (enclosed, MD-
C87)
Digital Input
FD-C39 (Optional)
Digital Signal Input Connecter
Power Cord
Signal Cable
Signal Cable
Analog Signal Input Connecter
1.
Signal Cable
Connector of PC
•
Video Output
Connector/ D-Sub
mini 15 pin
Input Connecor
(monitor)/ D-Sub
mini 15 pin
Connector of PC
•
Video Output
Connector DVI-I
Input Connecor
(monitor)/ DVI
2. CABLE CONNECTION
5.
USB Cable
PC
Standard graphics card
PC
Digital Graphics card
English
13