Connecting The Phone Line - Dish Network DuoDVR ViP 722k User Manual

Chapter 12

Connecting the Phone Line

C P L
ONNECTING THE HONE INE
You must keep the receiver connected to an active telephone line (or broadband network
connection) to order Pay-Per-View programs, use all of the DishHOME Interactive
features, or use other services from DISH Network with your remote control.
Note: You may be able to use a wireless modem jack. However, this may not support all
the features of this receiver, such as Caller ID. See www.dishnetwork.com for compatible
modem products.
Note: If you have a Digital Subscriber Line (DSL), you may have to install a DSL filter
between the receiver's back panel P J and the telephone wall jack to
HONE ACK
successfully connect with DISH Network. You can obtain a filter from your DSL provider.
Phone Line Connection
Run a telephone cable with a standard RJ-11 connector from the receiver's back panel
P to an active telephone connection as shown below.
HONE
Note: Do not connect the phone line to the Ethernet connection.
Phone Jack
Optional
Phone Coupler
Phone Jack
Phone
Y-Adapter
Optional
Phone Coupler
112