Creating Or Changing A Password; Locking And Unlocking Your Receiver - Dish Network DuoDVR ViP 722k User Manual

C C
REATING OR
Set up your password before using the receiver locks.
1
Press MENU and select Locks.
2
If the receiver is locked, enter the password using the NUMBER PAD. The receiver
displays stars (*) as you enter the digits of the password. Select OK.
3
If you are changing an existing password, then select Change Password. If you are
creating a password for the first time, then select Lock System and go to step 6.
4
Enter the current password using the NUMBER PAD. Select OK.
5
Press SELECT.
6
Enter the new password using the NUMBER PAD. Select OK.
7
Enter the new password again for confirmation, using the NUMBER PAD. The receiver
displays stars (*) as you enter the digits of the password. Select OK.
8
Memorize the new password. From now on, enter this password to lock or unlock the
receiver. If you forget your password, you will need to speak with a Customer Service
Representative.
L U
OCKING AND
You must lock the receiver for any receiver locks you set to take effect. Locking the
receiver also locks TV1's modulator output (see page 90). To lock the receiver, you must
first create a password. (See Creating or Changing a Password on page 45.) Be sure to
refer to this section whenever you set any lock on your receiver.
P
HANGING A ASSWORD
Y
NLOCKING OUR

Creating or Changing a Password

R
ECEIVER
Locks
45