Locking And Unlocking The Receiver - Dish Network 118523 User Manual

Chapter 3
Using the System
When You Have Locked the Receiver

Locking and Unlocking the Receiver

Page 94
• If you try to access a locked item or open the
displays a message prompting you to enter the password.
• The receiver allows you three tries to enter the correct password. If you fail
to enter the correct password, the receiver does not allow more tries for
several minutes.
• If you enter the correct password, you can access the locked item or open
the menu.
Locks
•
If you exit a locked item or close the
password to access the item.
The locks you set for
Single Mode
programming you select is not appropriate for all viewers on
remote TV(s), be sure to disable
instructions).
You must lock the receiver for any receiver
the receiver, you must first create a password. If you forget your password, you
will need to speak with a Customer Service Representative. If you have a
Personal Identification Number (PIN), you will need to give it to the Customer
Service Representative. See page 101 for information on PINs.
1. Press the MENU button to display the
2. Select the option to display the
Locks
: If the receiver displays a message prompting you to enter a
Note
password, the receiver has already been locked.
: If you want to unlock the receiver or any specific lock, use the
Note
password for the TV output you're watching. For example, use TV1's
password to unlock TV1's locks and TV2's password for TV2's locks.
Locks
menu, you must enter the
Locks
in
TV2 Dual Mode
. When using the receiver in
Shared View
Locks
Main Menu
Locks
menu, the receiver
are not available in
, if the
Single Mode
(see page 51 for
you set to take effect. To lock
.
menu.