Timer Frequency; Timer Priorities - Dish Network 118523 User Manual

Chapter 3
Using the System
Overview
Page 70
Refer to this section as you get familiar with how to set up
Timer Types
There are three types of timers:
• - Records an event onto your receiver for later viewing.
DVR
• - Automatically changes the channel for live viewing of the event.
Auto
• - Creates an on-screen reminder when the event is about to
Reminder
air.

Timer Frequency

Deciding how often you want to watch a program will help you make the best
choice:
• - Records each time that program is on that channel.
All Episodes
•
New Episodes
on that channel.
• - Records a program once (good for movies, sporting events,
Once
etc.).
• - Records a program once a week, at that time, on that channel.
Weekly
• - Records a program once a day, at that time, on that channel.
Daily
•
Monday-Friday
Friday, at the selected time, on that channel.
• - Records programs on all channels (default) or a specific
DISH Pass
channel, based on your specific criteria. See page 77 for details.
: ,
Note Weekly Daily,
program is within one hour earlier or four hours later than the original
time the timer was set up. These timers will adjust their length if their
program's time block is extended.

Timer Priorities

Priorities are used by the receiver to know which program you would prefer to
record, if multiple timers are scheduled to start at the same time.
- Records current season programs each time they occur
- Records a program once a day, Monday through
and
Monday-Friday
.
Timers
timers will move only if the