Dish Network 118523 User Manual page 56

Using Shared View
is a feature of
Shared View
and video outputs to display the same programming as the TV1 outputs. While
using this feature, both the green 1 and blue 2 remotes for your satellite receiver
can control what is displayed on all TVs connected to the system. The following
instructions describe how to enable
1. Make sure the receiver is in
indicator should be lit. If not, press the MODE button the receiver front
panel.
2. Press MENU-6-2 to open the
only.
Single Mode
3. Select
Enable View
: If you do not want to display programming on any other TV besides
Note
TV1 and you do not want Remote Control 2 to control the receiver, select
. The following screen is displayed on remote TVs when
Disable View
is disabled:
Shared View
4. Select . All of the TVs connected to the satellite receiver are
Done
displaying the same program.
that lets you activate the TV2 audio
Single Mode
Shared View
. The SINGLE front panel
Single Mode
Shared View
.
Using Dual and Single Modes
:
screen. This screen is used in
Page 51