Confirm Proper Operation - Kohler STERLING Whirlpool 7626 Series Installation Manual

Fill with water at least 2" (51 mm)
above the highest jet.
Turn the jet trim ring
clockwise to
decrease the flow.
Turn the jet trim ring counterclockwise
to increase the flow.
18. Confirm Proper Operation
Installation Checkout
Verify all electrical connections.
Verify that the pump banding straps have been cut.
Fill the Whirlpool
Fill the whirlpool to at least 2" (51 mm) above the top of the highest jet.
Operating Sequence
Press the air switch to turn on the whirlpool jets.
Verify that the pump starts and operates without excessive noise or vibration.
Verify that water is circulating and flowing from each jet.
Adjust each jet for optimum flow. Turn the trim ring clockwise to decrease the flow, and
counterclockwise to increase the flow.
Press the air switch a second time to turn off the whirlpool.
Drain the whirlpool.
1105582-2-F
Position the jet
nozzles to direct
the water flow as
desired.
20
Press the air switch to turn the
whirlpool on or off.
Sterling