Table of Contents
Advertisement
Installation Setup
Establishing a Network Connection between Printer and Computer
1.
Connect the printer and computer to the network.
The supported interface is 1000BASE-T/100BASE-TX.
For information about the connection procedure, see "Connecting the Cable" and "Ethernet
Configuration", Operating Instructions.
1000BASE-T/
100BASE-TX
PC
2.
Make a note of the printer's IP address.
When you use RICOH Pro L5160e/L5130e with ColorGATE Productionserver, the printer's IP
address is required to set up your printer.
Computer Setup
Before installation, do the following:
1.
Log into the account with administrator privileges.
2.
Temporarily disable the anti-virus software.
3.
Set the user account control (UAC) setting to "Never notify".
• Windows 10
[Start]menu
[Windows system]
[Change User Account Control settings]
Internet
1000BASE-T/
100BASE-TX
Hub
Printer
[Control Panel]
[Never notify] (bottommost item)
Installation Setup
EDP003
[User Accounts]
[User Accounts]
7
Advertisement
Table of Contents
