Orifice Removal; Igniter Installation - Wolf CG Series Service Manual

Professional gas cooktop
Hide thumbs Also See for CG Series:
Table of Contents

Advertisement

REMOVE THE BURNER ASSEMBLY (continued)
4
Remove the burner assembly from the unit.
Remove the Igniter
1
Use a Phillips screwdriver to remove the screw from the
underside of the burner assembly.
2
Remove the igniter from the burner assembly.

IGNITER INSTALLATION

Install the Igniter
1
Install the igniter into the burner assembly.
2
Use a Phillips screwdriver to install the screw into the
underside of the burner assembly.
Install the Burner Assembly
1
Attach the electrode wire to the igniter.
2
Place the burner assembly into the burner pan.
3
Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
828386 REV. A
06/2018
CG Professional Gas Cooktop Service Manual
Burner Cap
Burner Assembly
Igniter
Electrode Wire
Install the Burner Cap
Place the burner cap onto the burner assembly.
Install the Burner Grate
Place the burner grate onto the cooktop.

ORIFICE REMOVAL

The main and simmer orifices are threaded into the orifice
holder and may be removed without removing the orifice holder.
To access the orifice, first remove the burner grate, burner cap,
and burner assembly.
WARNING
Turn off the power to the product before starting this
procedure.
Remove the Burner Grate
Lift the burner grate from the unit.
7
service.subzero.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents